Winix PlasmaWave WAC-9000S Operator's Manual download pdf (Page 14)

4. Place the new lter cassette in the

main unit.

5. Replace the front panel after pressing

CHANGE FILTER reset button.

6. Plug in the power cord to a wall outlet

and turn on the unit.

Filter Cleaning

We recommend cleaning the Washable

Anti-Bacterial Pre-Filter and the Washable

Nano-Silver Mesh/Carbon Filter every

three months with normal use. The interval

between cleanings will vary based on room

conditions.

1. Remove the front panel and lter

cassette as described in Replacement

Procedure.

2. Remove the Pre-Filter by gently pulling

one side of the cassette frame outward

while lifting the Pre-Filter tab at the same

time. When one edge is

clear of the frame, the

Pre-Filter will slide

out for cleaning.

3. Lightly vacuum the Pre-Filter and wash

with water and a mild household deter-

gent. Rinse, and shake off excess water.

4. To remove the Washable Nano-Silver

Mesh/Carbon Filter, turn the cassette

over and place face-down on an even

surface. Slightly ex the cassette frame

outward while pulling up on the long

tab. When the rst corner is released,

pull out on the other long frame tab while

continuing to pull out on the lter tab.

When one long

edge of the lter

is free, slide out

for cleaning.

12 13

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Comments to this Manuals

No comments