Winix PlasmaWave WAC-9000S Operator's Manual download pdf (Page 16)

TROUBLESHOOTING

The remote control

does not work.

The unit leaves smoke

and odors in the air.

The unit seems to

produce odors.

The dust or odor light

is green, but there is

still dust/odor in the air.

The dust or odor light

is orange or red, but

the air seems clean.

Unit makes a ticking

sound.

Unit interferes with

radio or television

reception.

The REPLACE FILTER

indicator

remains lit

after replacing the lter

cassette.

PROBLEM

• Make sure the remote control batteries are inserted correctly.

• Replace worn-out batteries.

• Make sure the sensor is not blocked or clogged.

• Move the unit closer to the offending odors.

• Replace or wash the lter as needed.

• Clear the sensor with a vacuum cleaner, as it may be blocked

or clogged.

• Clear the sensor with a vacuum cleaner, as it may be blocked

or clogged.

• This indicates that the PlasmaWave

function is working.

If the sound is distracting, turn off this function while you are

in the room.

• Because this unit radiates radio frequency energy, we suggest

you try one or more of the following:

- For better reception, adjust the television/radio antenna.

- Move the unit away from the affected television/radio.

- Plug the unit power cord into an outlet different from the

television/radio power cord.

• Press the FUNCTION and OFF TIMER buttons at the same

time for ve seconds. The REPLACE FILTER indicator

will ash ve times and turn off.

POSSIBLE SOLUTION

Before you call

Solutions to Common Problems

Review this list before you call for service. This list covers problems that are not the result

of defective materials or workmanship.

14 15

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments

Winix PlasmaWave WAC-9000S Operator's Manual Page 16

Comments to this Manuals

Related products and manuals for Air filters Winix PlasmaWave WAC-9000S