Winix PlasmaWave WAC-9000S Operator's Manual download pdf (Page 7)

AIR CLEANER SET-UP

NOTE: Follow these instructions for

best results.

• Place unit at least 7 feet from equipment

that emits electric waves such as

televisions or radios.

• Place unit at least 2 feet from the wall.

• Keep sensors away from drafty areas.

• Keep curtains away from sensors, as

they may interfere with air intake/outlet.

• Place unit on a stable surface with plenty

of air circulation.

1. Remove protective lm from the

control panel.

2. Remove the front panel by grasping the

bottom outside edges and gently pulling

toward you.

3. Pull out the lter cassette by grasping

the tabs located on each side of the

lter cassette.

4. Remove the plastic wrap from the

lter cassette.

5. Return the lter cassette into the

main unit.

6. Replace the front panel by hooking the

front panel on the top of the unit. Swing

panel in by pushing gently until the panel

snaps into place.

7. Plug in the power cord to a wall outlet.

8. Press POWER button until short “beep”

is heard.

For the rst 4 minutes after turning the

unit on, the dust and odor indicators will

ash while the unit measures air quality.

6 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comments to this Manuals

No comments